Sony SRX-R515P Manual page 3

Bulletin No.: 036
SRX-R515P
Connecting R515 to a Windows storage device
The diagram below shows a typical example of a storage device connected to 2x SRX-
R515P projectors.
Projector 1
CTRL Port IP – 192 .168 .101 .11
DATA Port IP – 192.168.201.11
SRX‐R515
XCT‐M10 (IMB)
XCT‐S10 (Server)
CTRL
The XCT-S10 requires that the CTRL IP address and the DATA IP address are required to
be on separate subnets. This can be used to separate CTRL and DATA traffic through the
use of VLANs on a switch.
Login and navigate to
NETWORK
PRJ
NB. DATA port IP Address
must be on a different subnet
to the CTRL port IP Address .
DATA
Gb NETWORK SWITCH
Server Storage with
XXTB
Server
CTRL IP – 192.168.101.5
DATA IP – 192.168 .201 .5
Figure 3 - Network Storage connection example
DCinema Bulletin Archive:
https://filex.sony-europe.com/
Dealers/Digital Cinema Bulletins
th
19 February, 2013
Projector 2
CTRL Port IP – 192.168.101.12
DATA Port IP – 192.168.201.12
SRX‐R515
XCT‐M10 (IMB)
NETWORK
PRJ
XCT‐S10 (Server)
CTRL DATA
The Switch can be configured for separate
VLANs for the control and data traffic . This
is up to the installer /customer preference .
If the Storage device has two NICs you may
wish to set one to the CTRL subnet and the
other to the DATA subnet . If only one NIC is
available set two IP addresses for the one NIC .
folder