Fuse Replacement - Pride Ultimate 3 CF3001 Owner's Manual

X . C A R E

FUSE REPLACEMENT

In the event a fuse should cease to work:
! Remove the fuse by pulling it out of its slot.
! Examine the fuse to be sure it is blown. See figures 23 and 24.
! Insert a new fuse of the proper rating.
Figure 23. Working Fuse
REAR LIGHTS
Light bulbs for the rear running lights and turn indicators are easily replaceable.
WARNING! Do not use regular automotive-type 12-volt light bulbs; your scooter is equipped with a
24-volt electrical system.
NOTE: Replacement light bulbs can be purchased from your authorized Pride Provider.
! Remove the light cover.
! Gently remove the bulb by pulling it straight out.
! Insert a new 24V, 5-watt bulb.
! Replace the light cover.
36
A N D M A I N T E N A N C E
Figure 24. Blown Fuse (Replace)
www.pridemobility.com Ultimate