Advertisement
FRONT VIEW
8-1/4 in.
(210 mm)
P.S.I.
9-3/4 in.
(248 mm)
10-1/4 in.
(260 mm)
CAUTION: "OIL FILLED INSTRUMENTS CONTAIN SILICON OIL" Exposure may be hazardous under certain circurmstances.
"DO NOT CUT CAPILLARY" It contains chemicals or solvents which may be hazardous under certain circurmstances.
"Keep out of Eyes, Mouth and Do Not expose to Skin". Keep out of reach of children. Flush thoroughly with water and seek medical attention.
If swallowed, call physician immediately. MSDS Sheets ara available by calling: 918/627-3550.
CAUTION: : Certain dangers to human safety and to equipment may occur if some equipment is stopped without
pre-warning. It is recommended that monitored functions be limited to alarm-only or to alarm before shutdown.
www.fwmurphy.com
918.317.4100 Email: sales@fwmurphy.com
Dimensions
SIDE VIEW
4-5/8 in.
(117 mm)
F
NOTE: Mounting brackets
and shockmounts not
shown in this view.
In order to consistently bring you the highest quality, full featured products, we reserve the right to change our
specifications and designs at any time. MURPHY, the Murphy logo, and Swichgage
mon law trademarks of Murphy Industries, Inc. This document, including textual matter and illustrations, is copy-
right protected by Murphy Industries, Inc., with all rights reserved. (c) 2006 Murphy Industries, Inc.
DTZ-94098B page 2 of 2
BOTTOM VIEW
1/4 in. (6 mm)
M10 x 1.5
diameter
1-13/16 in.
(46 mm)
3 in.
(76 mm)
are registered and/or com-
®
Advertisement
