Program Radio Stations Manually; Tune To A Preset Radio Station; Adjust Sound; Adjust Volume Level - Philips dcd8000 User Manual

Program radio stations
manually
Note
•
You can program a maximum of 20 preset
radio stations.
1
Tune to a radio station.
2
Press PROGRAM to activate
programming.
3
Press / to allocate a number from
1 to 20 to this radio station, then press
PROGRAM to confirm.
»
The preset number and the frequency
of the preset station are displayed.
4
Repeat the previous steps to program
other stations.
Note
• To overwrite a programmed station, store
another station in its place.

Tune to a preset radio station

1
Press / to select a preset number
that you want.

8 Adjust sound

Adjust volume level

1
During play, press VOL +/- to increase/
decrease the volume level.

Select a sound effect

Note
•
You cannot use different sound effects at the
same time.
Adjust bass level
1
During play, press BASS to enter bass
adjustment.
2
Press VOL +/- to adjust the bass level.
Adjust treble level
1
During play, press TREBLE to enter treble
adjustment.
2
Press VOL +/- to adjust the treble level.
Select automatic loudness control
The loudness feature enables the system to
increase the treble and bass sound effect
at low volume automatically (the higher
the volume, the lower the treble and bass
increase).
1
During play, press LOUDNESS to turn
on/off automatic loudness control.

Mute sound

1
During play, press
sound.
to mute/resume
EN 23