Tune To Fm Radio Stations; Program Radio Stations Automatically; Program Radio Stations Manually; Tune To A Preset Radio Station - Philips MCM770 User Manual

7 Tune to FM
radio stations
1
Ensure that you have connected and fully
extended the supplied FM antenna.
2
Press FM .
3
Press and hold
4
When [SEARCH] (search) is displayed,
release the button.
The FM tuner tunes to a station with
»
strong reception automatically.
5
Repeat steps 3-4 to tune to more stations.
To tune to a weak station:
Press / repeatedly until you fi nd optimal
reception.
Program radio stations
automatically
Note
•
You can program a maximum of 20 preset radio
stations.
1
Press / to select a preset number to
start programing.
2
Press and hold
activate automatic programming.
[AUTO] (auto) appears.
»
All available stations are programmed
»
in the order of waveband reception
strength.
The last programed radio station is
»
played automatically.
/ .
/ for 2 seconds to
Program radio stations
manually
Note
•
You can program a maximum of 20 preset radio
stations.
1
Tune to a radio station.
2
Press PROGRAM to activate programming.
3
Press / to allocate a number from
1 to 20 to this radio station, then press
PROGRAM to confi rm.
The preset number and the frequency
»
of the preset station are displayed.
4
Repeat the above steps to program other
stations.
Note
•
To overwrite a programmed station, store another
station in its place.

Tune to a preset radio station

1
Press / to select a preset number
that you want.
Tip
•
You can also use the numerical keypad to select a
preset station directly.
•
To enter a 2 or 3-digit number, press SHIFT , then enter
the number.

Show RDS information

RDS (Radio Data System) is a service
that allows FM stations to show additional
information. If you tune to a RDS station, a RDS
icon and the station name are displayed.
EN
19