Cpu; Installation Of Cpu - WinFast ck804k8ma series Manual

This motherboard supports Athlon
HyperTransport
Attention:
The CPU pins must be properly aligned with the holes in the
socket, otherwise the CPU may be damaged.

Installation of CPU

Follow these steps to install the CPU.
1. Unlock the socket by pressing the le-
ver sideways, then lift it up to a 90
angle.
2. Align the cut edge to the gap in the base
of the socket. Carefully insert the CPU
into the socket until it fits in place.
When the CPU is in place, press it
firmly on the socket while you push
down the socket lever to secure the
CPU. The lever clicks on the side tab
to indicate that it is locked.
CK804K8MA-manual-V1.0-111704.p65
TM
Technology.
TM
CK804K8MA Series User Manual
7
Chapter 2 Installation Instructions
64, Athlon 64FX family processors with
TM
o
Cut edge
2004-11-19, 14:51
Gap in the base
Push down the socket
lever to secure the CPU.
7