Cpu - WinFast NF4K8AB User Manual

This motherboard supports AMD socket 754 Sempron
cessors with HyperTransport
Attention:
The CPU pins must be properly aligned with the holes in the
socket, otherwise the CPU may be damaged.
Installation of CPU
Follow these steps to install the CPU.
1. Unlock the socket by pressing the le-
ver sideways, then lift it up to a 90
angle.
2. Align the cut edge to the gap in the base
of the socket. Carefully insert the CPU
into the socket until it fits in place.
When the CPU is in place, press it
firmly on the socket while you push
down the socket lever to secure the
CPU. The lever clicks on the side tab
to indicate that it is locked.
8
Chapter 2 Installation Instructions
TM Technology.
o
NF4K8AB Series User Manual
TM
, Athlon
Push down the socket
Cut edge
lever to secure the CPU.
TM
64 family pro-
Gap in the base