Other Connectors - WinFast ck804k8ma series Manual

Other Connectors

This motherboard includes connectors for FLOPPY, IDE HDD, SATA, USB, IR
module, CPU fan, system fan, and others.
Floppy Connector: FLOPPY
This motherboard includes a standard floppy connector, supporting 360 K, 720 K,
1.2 M, 1.44 M, and 2.88 M FDDs.
HDD Connector: PIDE
The connector supports the provided Ultra DMA 133/100/66/33 IDE hard disk
ribbon cable. Connect the cable's blue connector to the IDE connector, then
connect the grey connector to the Ultra DMA 133/100/66/33 slave device and
the black connector to the Ultra DMA 133/100/66/33 master device.
Attention:
Ribbon cables are directional, therefore, make sure to always con-
nect with the cable on the same side as pin 1 of the PIDE or FLOPPY
connector on the motherboard.
Front Panel Connector: FP1 (J38)
Attach the power LED, IDE LED, reset switch
and power switch connectors to the corre-
sponding pins.
Hard Disk LED Connector (HDLED)
Attach the connector to the HDLED on the front panel of the case; the LED will
flash while the HDD is in operation.
Reset Switch (RESET)
Attach the connector to the Reset switch on the front panel of the case; the
system will restart when the switch is pressed.
16
CK804K8MA-manual-V1.0-111704.p65
Chapter 2 Installation Instructions
CK804K8MA Series User Manual
16
+ +
1
- -
FP1 (J38)
2004-11-19, 14:51