Panel Illustration - Hyundai PDL 783 UHD DVBT Instruction Manual

EN

PANEL ILLUSTRATION

1. Front View
1) SOURCE: To select input source.
2) SETUP: Used to adjust the brightness/contrast/color parameter of TFT screen.
3) CH+: Move around the menu screens or selecting the channels in non-menu state.
4) OK: Confirm a selection within a menu.
5) VOL-: Move around the menu screens or changing the volume in non-menu state.
6) VOL+: Move around the menu screens or changing the volume in non-menu state.
7) CH-: Move around the menu screens or selecting the channels in non-menu state.
8) ASPECT: To change picture aspect.
9) MENU: Open the main menu window.
10) EXIT: Exit menu.
11) REMOTE CONTROL SENSOR: Receive the signal from the remote control
12) TFT screen: Display the TFT wide screen display.
13) Antenna input: Connect to an external RF signal.
14) Speaker Left: The left speaker.
15) USB
16) Speaker Right: The right speaker.
2. Right View
1) AV IN JACK: This jack used to connect a external CVBS video and analog audio input.
2) AV OUT JACK: This jack outputs CVBS video and analog audio signal.
3) EARPHONE JACK: This jack outputs analog audio L/R signal to earphone.
4) POwER SwITCH: This switch used to switch on/off the system.
5) DC IN JACK: This is used for AC-DC adaptor input, the voltage range is 12 V.
6) CHARGE INDICATOR: The system is in charging state when red LED is lighting, it will turn
into green when full charged.
EN - 51