North Star M110800F.4 Owner's Manual page 51

Step 9 – Outrigger Leg to Tank
 Connect the rear outrigger leg to the backside of the hydraulic tank
assembly
 Tighten nut until snug then back off 1/2 turn
 NOTE: Once the Outrigger Leg is installed, lock the leg in the down
position.
Fasteners Needed from Parts Bag:
Out Rigger to Tank
Flange Bolt
Qty 1
Assembly Instructions
Out Rigger to Tank
51
Out Rigger to Tank
Washer
Qty 1
Tools Needed
 15mm Wrench
 16mm Wrench
Nyloc Nut
Qty 1
Nut
Washer
Bolt
Out Rigger Leg