Advertisement
Available languages
Available languages
Display icons and operating elements
2 Living space humidity (Comfortable, dry, humid)
WSRC 2257
Weather Station with wireless-thermometer, humidity
4 Indoor low battery
5 Rainfall
sensor, wind measurement and radio clock
6 Air Pressure
7 Wind direction
8 Date
9 Wind speed
10 Month
11 Day of week
12 Moon Phase
13 Dual alarm
14 Time
15 RCC symbol (radio clock)
16 Summer time
17 Outdoor low battery
18 Outdoor humidity
19 Outdoor humidity trend
20 Indoor humidity
21 Outdoor temperature
22 Outdoor temperature alert
23 RF symbol
24 Indoor temperature alert
25 Outdoor temperature trend
26 Indoor temperature
27 Indoor temperature trend
A MODE
B +
C -
D ALARM
E ALERT
F SNOOZE/LIGHT
a Rain sensor
e Thermo-hygro sensor
h Compass mark
ENGLISH
Operating Instructions
Please read and observe the following information and keep the
operating manual nearby for future reference!
WARNING!
Safety information
Only use batteries of the same type!
Always treat batteries with due care and attention and only use
batteries as described.
Never use standard and rechargeable batteries together. Never use
rechargeable batteries or standard batteries with different capacities or
charge statuses together. Never use standard or rechargeable batteries
which are damaged.
INSTALLATION
Risk of suffocation through small objects, packaging and protective foil!
Keep children away from the product and its packaging!
NOTE! Before fitting the external sensors, the radio link between
Risks to health and the environment from batteries!
WSRC 2257 and the transmitter (e) must be established.
Never open, damage or swallow batteries or allow them to pollute the
First fit the batteries into the WSRC 2257, and thereafter (within 3
environment. They could contain toxic and ecologically harmful heavy
minutes) into the radio transmitter.
metals.
When the data transmission between WSRC 2257 and the radio
transmitter (e) is established, install the outdoor sensors as shown in
ATTENTION!
assembly after the compass mark (h).
Prevent exposure to environmental influences, e.g. smoke, dust,
Connect the data cable from the Wind speed sensor (b) to the socket in
vibration, chemicals, moisture, heat and direct sunlight.
the wind direction sensor (c)
Only allow repairs to be completed by qualified personnel.
Now connect the data cable of the wind direction sensor (c) and the
rain sensor to the corresponding jacks (f) in the radio transmitter (e)
Slide the shower proof casing (d) in the guide over the radio transmitter (e)
Package contents
For accurate results, the outdoor sensor mast should be securely
1x weather station main unit , 1x stainless steel mast, 1x thermo-hygro
sensor, 1x rain sensor, 1x wind speed sensor, 1x wind direction sensor,
Mounting screws, Stainless steel accessory for fixing the mast and screws
STARTING UP
1 Weather Forecast
After inserting the batteries, the main unit will connect with the radio
transmitter (2) by RF signal. The RF signal (23) symbol at the out area
3 Indoor humidity trend
will flash.
This process takes about 3 minutes. Then the display shows the
outdoor temperature /humidity/wind speed/wind direction/rainfall, in
case of failure of reception, pls press"ALARM" for more than 3 seconds
The automatic receiving of the DCF radio signal (DCF77, Time signal
frequency 77,5 kHz) begins after 3 minutes of outdoor RF reception.
This DCF reception process is going on,the flashing symbol "radio
tower" (15) appears in the time display area at the same time.
Once radio signal receiving is successful, the display shows the symbol
"radio tower" (15) continuously. No flashing. One synchronisation per
day is sufficient to keep the time display accuracy at 1 second.
Please observe a minimal distance of 2.5m to sources of interference
The radio signal sender (DCF) coverage up to 1500km distance to
Frankfurt/Main. If, due to bad reception,or no RCC automatic time
reception is possible, follow the steps below manually.
MANUAL SET-UP
(The clock automatically changes from set-up mode to time display mode if
no keys are pressed for 20 seconds.)
Press and hold key "MODE" for 3 seconds.
The 12/24 hour flashing. Use "+" and "-" to select
Press "MODE" to confirm.
The display for the time zone is flashing. Use "+" and "-" to select the
time zone (-12 to +12).
Press "MODE" to confirm.
The DM/MD flashing, Use "+" and "-" to select
Press "MODE" to confirm.
The display for the year is flashing. Use "+" and "-" to select the year.
Press "MODE" to confirm.
b Wind speed sensor
The display for the month is flashing. Use "+" and "-" to select the
c Wind direction sensor
d Shower proof casing
Press "MODE" to confirm.
The display for the date is flashing. Use "+" and "-" to select the date.
f Wind and rain socket
Press "MODE" to confirm.
g Stainless steel mast
The display for the hour is flashing. Use "+" and "-" to select the hour.
Press "MODE" to confirm.
The display for the minutes is flashing. Use "+" and "-" to select the
h
d
Press "MODE" to confirm.
b
The language selection for the display of the weekdays is flashing. Use
c
"+" and "-" to select the language.
Press "MODE" to confirm
The ºC / ºF for temperature flashing, Use "+" and "-" to select .
Press "MODE" to confirm.
e
The hpa/inhg for air pressure flashing, Use "+ " and "-" to select .
Press "MODE" to confirm.
f
The mm/inch for rainfall and kmh/mpg flashing, Use "+ " and "- " to
Press "MODE" to confirm.
a
Daily alarm set-up
Press "MODE" to switch from time display to A1 display
Press and hold the key "MODE" for 3 seconds ,the flashing alarm time
g
The hour display of the alarm time is flashing. Use "+" and "-" to select
Press "MODE" to confirm.
Then follow the minutes. Use "+" and "-" to select the minutes,
Press "MODE" to confirm.
The same setting as for A2.
Daily alarm on/off
1st press "ALARM" to activate the alarm 1 with alarm symbol showing.
the drawing above.
2nd press "ALARM" cancel the alarm 1, then activate the alarm 2 with
ATTENTION: The wind direction sensor must be aligned at the final
3rd press "ALARM" to activate the alarm1 and alarm 2 with alarm
4th press "ALARM" cancel all the alarms
The alarm sounds for 2 minutes if no key is pressed to stop it.
Snooze function
mounted onto a horizontal surface and in an open area away from trees
Press the key "SNOOZE/LIGHT", while the alarm sounds, to activate
and other coverings where rainfall or wind speed may be reduced
causing inaccurate reading.
flashing. The alarm repeat after 5 minutes.
The snooze function can be stopped by pressing any key.
Max./ Min. for the indoor/outdoor temperature and humidity
Press "+" for displaying of indoor/outdoor max./min. of temperature and
humidity, hold "+" for more than 3 seconds to clear up the max./min.
to receive again.
Temperature alert set-up
It is possible to set an upper and lower limit for indoor and outdoor tempe-
rature. As an example this allows to get a frost damage warning. The main
unit will give an alarm signal when the set temperature limit is reached.
Press "ALERT" for more than 3 seconds, the upper limit of inside
temperature is flashing, use "+" and "-" to set the maximum alert
temperature.
Press "ALERT", the lower limit of inside temperature is flashing,
such as televisions or computer screens.
use "+" and "-" to set the minimum alert temperature.
Press "ALERT" , the upper limit of outside temperature is flashing,
use "+" and "-" to set the maximum alert temperature.
Press "ALERT", the lower limit of outside temperature is flashing,
use "+" and "-" to set the minimum alert temperature.
When the alert is activated, the alert symbol will be shown.
The set-up process cannot be completed if the maximum temperature
selected is lower than the minimum selected temperature.
Temperature alert on/off
Press and hold the key "ALERT" to set the temperature alert on or off.
Alert on: Temperature alert symbol shown in display
Alert off: Temperature alert symbol goes out.
Illumination
Press the key "SNOOZE/LIGHT" to activate the display illumination for
8 seconds.
WEATHER FORECAST
Sunny – Slightly Sunny – Cloudy – Rainy – Storm
As the weather is forecasted by air pressure only,
The display will have discrepancy with the actual weather sometime.
month.
Wind speed in mph/kmh (0 ~ 256 km/h)
The display of the speed is updated in case of the sensor updated every 1
minitues.
Wind direction
There will be 16 wind directions, the display of the direction is updated in
minutes..
case of the sensor updated every 1 minutes
Rainfall display ( 0~999.99mm)
Press "-" to show the rainfall in 1 hour, press again 24 hours, then
TOTAL.
Press "-" for more than 3 seconds to clear up the volum accordingly,
such as if showing 1 hour, clear up the data in 1 hour, others
unchanged, if showing 24 hours, clear up the data in 24 hour, others
unchanged.
The max. of the rainfall is up to 999.99mm (99.99inch), the display is
select.
flashing in case of the max., you have to clear up the data by hand,
otherwise, the data can not be updated any more.
Moon phase display
The weather station uses saved data to determine the moon phases. So it
is not necessary to manually enter data. There are 8 moon phases appear.
are shown
the hour.
alarm symbol showing
symbol showing.
the snooze function. If the snooze function is activated, alarm symbol is
Service hotline
In the case of technical problems, contact our Service hotline. Switzerland:
Tel. 0900 00 1675 (national charges, Swisscom at time of going to print:
CHF 2.60/min). In the case of claims under the terms of guarantee, contact
your sales outlet.
Maintenance
Clean the surface of the housing with a soft, fluff-free cloth. Do not use any
cleaning agents or solvents.
Guarantee
Dexford equipment is produced and tested according to the latest produc-
tion methods. The implementation of carefully chosen materials and highly
developed technologies ensure trouble-free functioning and a long service
life. The terms of guarantee do not apply to the batteries or power packs
used in the products. The period of guarantee is 24 months from the date
of purchase. All deficiencies related to material or manufacturing errors
within the period of guarantee will be redressed free of charge. Rights to
claims under the terms of guarantee are annulled following tampering by
the purchaser or third parties. Damage caused as the result of improper
handling or operation, normal wear and tear, incorrect positioning or
storage, improper connection or installation or Acts of God and other
external influences are excluded from the terms of guarantee. In the case
of complaints, we reserve the right to repair defective parts, replace them
or replace the entire device. Replaced parts or devices become our pro-
perty. Rights to compensation in the case of damage are excluded where
there is no evidence of intent or gross negligence by the manufacturer. If
your device does show signs of a defect within the period of guarantee,
please contact the sales outlet where you purchased the Dexford device,
producing the purchase receipt as evidence. All claims under the terms
of guarantee in accordance with this agreement can only be asserted at
the sales outlet. No claims under the terms of guarantee can be asserted
after a period of two years from the date of purchase and hand-over of the
product.
Disposal
In order to dispose of your device, take it to a collection point
provided by your local public waste authorities (e.g. recycling
centre). According to the laws on the disposal of electronic and
electrical devices, owners are obliged to dispose of old electronic
and electrical devices in a separate waste container. The adjacent
symbol indicates that the device must not be disposed of in normal
domestic waste!
You are legally obliged to dispose of power packs and batteries
at the point of sale or in the corresponding containers provided at
collection points by local public waste authorities. Disposal is free of
charge. The symbols indicate that the batteries must not be disposed of in
normal domestic waste and that they must be brought to collection points
provided by local public waste authorities. Packaging materials must be
disposed of according to local regulations.
Declaration of Conformity
This device fulfils the requirements stipulated in the Directive
1999/5/EC on radio equipment and telecommunications terminal
equipment and the mutual recognition of their conformity. Conformi-
ty with the above mentioned directive is confirmed by the CE mark on the
device. To view the complete Declaration of Conformity, please refer to the
free download available on our web site www.dexford.com.
Technical data (All rights reserved)
Feature
Value
WSRC 2257
W x H x D
169 x 120 x 48 mm
Weight
320 g (without battery)
Signal frequency
433 MHz
Power
2 x 1,5V AA, not included
Temperature range
-20 ~ +50 °C
Humidity range
20 ~ 95 %
External sensors, max. 30 meters in open area
W x H x D
400 x 650 x 400 mm
Weight
ca. 760 g (without battery)
Power
2 x 1,5V AA, not included
Temperature range
-20 ~ +60 °C
Humidity range
20 ~ 95 %
Advertisement
