Table of Contents
Advertisement
■
Reception interference caused by wireless
LAN devices
This terminal's Bluetooth device and wireless
LAN devices use the same frequency band
(2.4GHz). If you use the terminal near a
wireless LAN device, reception interference
may occur or the communications speed may
lower. Also, you may hear noise or have a
connection problem. In these cases, do the
following:
1. Keep the Bluetooth device over 20 m away
from a wireless LAN device.
2. Within 20 m, turn off either the Bluetooth
device or the wireless LAN device.
■
Bluetooth pass code
Pass code is an authentication code to
enter when accessing Bluetooth devices for
the fi rst time to recognize and permit the
connection each other. Entering the same
pass code (up to 16 Half-width alphanumeric
characters) on each sending/receiving device
is required.
• On this terminal, pass code may be
displayed as "PIN".
312
File management
Advertisement
Table of Contents
