Specifications - Klark Teknik DN32-USB Quick Start Manual

12 KLARK TEKNIK DN32-USB
1. DN32-USB Interface
Operation Guide
1.1 Host system requirements for
DN32-USB interface expansion card
Check klarkteknik.com for updates of DN32-USB fi rmware or
system requirements. Please fi nd the recommended hardware/
software minimum confi gurations in the specifi cations section.
1.2 The KLARK TEKNIK DN32-USB
High-Performance 32-Channel
24-Bit USB Audio Interface
The DN32-USB option card provides MIDAS M32 consoles with
32 channel, bi-directional audio I/O and MIDI via USB 2.0 serial bus
for Mac or Windows-based applications. The simultaneous 32-in,
32-out audio channels enable for extremely powerful studio and
live applications. You can run virtual live sound checks or 32-track
high-quality studio recordings, while at the same time remote
operating your DAW via HUI/Mackie Control emulation. The high
speed 24-bit signal transmission and ultra-low latency ASIO
drivers and CoreAudio compatibility even allow inserting audio
plugins on your PC to perform advanced outboard processing.
1.3 Confi guring the DN32-USB option
card for use in the console
The console will automatically detect the DN32-USB option card
during the regular boot cycle, and it will display the card's
presence in several instances.
The green square in front of "C: USB" indicates that the card is
installed and working properly.
2. Installing a KLARK TEKNIK
Interface Card
Before you install an I/O card to the expansion slot of the console,
you must check the KLARK TEKNIK website to verify whether the
console supports that card.
CAUTION: Before installing optional I/O cards into the console,
you must make sure that the console's power switch is turned off .
Malfunctions or electrical shock may occur otherwise.
To install an interface I/O card:
1. Make sure that the mixer's power is turned off .
2. Loosen the screws that fasten the slot, then remove the slot
cover and keep it in a safe place.
3. Before removing the DN32-USB card from its protective bag,
it is recommended to touch the grounded metal chassis of
the console to prevent electrostatic discharges aff ecting the
sensitive electronic components. It is generally a good idea
to hold the card either by the face plate or by the two small
handles, but never touching the components on the circuit
board directly.
4. Align both edges of the card with the guide rails inside the
slot and carefully insert the card into the slot. Push the card
all the way into the slot to ensure that the contacts of the
card are correctly inserted into the connector inside.
5. Fasten the card using the included screws. Be aware that
damage or malfunctions may occur if the card is
not fastened.
3. Confi guring the PC to Interface
with the DN32-USB Option Card
Please watch klarkteknik.com for further advice on the software
confi guration of DN32-USB interface card.
Windows: There is an ASIO high-performance
driver available for download,
which is essential for low-latency audio
on Windows-based applications.
Mac OS: The DN32-USB is CoreAudio compatible
and thus works with low-latency on
Mac computers without any additional
driver installation.
4. Specifi cations
Expansion Card Features:
Interface MIDI
High Speed USB 2.0 1 in x 1 out
DAW remote control Generic MIDI, HUI and Mackie Control Universal emulation
Expansion Card Performance:
Interface
High Speed USB 2.0
Physical
Dimensions
Weight
* depends on system performance and application
Recommended Minimum Hardware:
Windows-based - Core 2 Duo CPU, 2 GHz
application - USB 2.0 port
- 1 GB RAM
Mac - 1.5 GHz CPU
- USB 2.0 port
- 512 MB RAM
Recommended Operating Systems:
Windows: Windows XP 32-Bit SP2 or higher, Windows 7 32-bit, Windows 7 64-bit, Windows 8 64-bit
(DN32-USB ASIO drivers supplied)
Mac OS X : 10.7 Lion, 10.8 Mountain Lion, 10.9 Mavericks
*10.6.8 (16 x 16 max)
(CoreAudio compatible)
Mac, Mac OS, OS X, Lion, Mountain Lion, and Mavericks are trademarks of Apple Inc., registered in the U.S. and other countries. Windows, Windows XP, Windows 7 and Windows 8 are registered
trademarks of Microsoft Corporation in the United States and other countries. HUI and Mackie are trademarks or registered trademarks of LOUD Technologies, Inc. Asio is a trademark or registered
trademark of Steinberg Media Technologies GmbH.
Quick Start Guide
ASIO Driver for Windows-based Applications
Download the ASIO driver installer fi les from klarkteknik.com.
Double-click on Setup.exe in the corresponding unpacked folder and
follow the instructions on the screen.
Driver Control Panels
Once the driver is installed, you can open the control panel by
double-clicking on the small tray icon. These screens will allow
confi guring the DN32-USB expansion card in the M32 as an audio
interface for your computer.
Download the M32 full manual from midasconsoles.com
for more information.
Audio input channels Audio output channels
24-Bit, 44.1/48 kHz 24-Bit, 44.1/48 kHz
32, 16, 8 or 2 32, 16, 8 or 2
Typical round-trip latency
~14 ms*
30 x 165 x 138 mm (1.18 x 6.5 x 5.4")
0.14 kg (0.31 lbs)
13