Checking Memory Usage On Your Pagewriter 2000 - Motorola PageWriter 2000 User Manual

5. At the Select Backup File screen, select the file containing
the saved information you want to restore to your pager,
then click Next.
6. Click Connect to start the restore.
Caution
All data on your pager (saved messages, Address Book entries,
and applications) is deleted and replaced by the version of the
data that was restored from your PC. This means that if you
made changes to your Address Book on your pager after the last
backup to your PC, you will lose those changes during this
restore.
7. When the confirmation message appears, click OK.

Checking Memory Usage on Your PageWriter 2000

The FLEX PC Partner Memory Usage partlet enables you to
monitor the allocation of persistent storage on your pager. When
the Memory Usage partlet indicates that the free memory on
your pager is getting low, you can increase the free memory
level by deleting old messages or applications.
The memory usage levels refer to persistent flash storage
(analogous to the hard drive on your PC) rather than
volatile memory (RAM). The Memory Usage partlet does
not monitor RAM.
To check memory usage on your pager:
1. Snap your pager into the charger.
2. On your pager, select
wheel, then select
3. On your PC, open the FLEX PC Partner Shell, double-click
If you add or delete information from your pager while
TIP
Memory Usage is open, click Refresh to update the
memory usage information.
4. Click Exit.
Memory Usage.
from the menu
.
FLEX PC Partner
67