Orient BTP-R880NP User Manual page 9

Paper type: Continuous thermal paper

Paper supply method: Paper roll

Paper width: 82.5±0.5mm,80±0.5mm, 76±0.5 mm,69.5±0.5mm 57±0.5mm

Paper thickness: 0.06mm-0.1mm

Thermal senstive layer: Outside

Paper roll specifications OD(MAX):ф83mm

Recommended reference paper:

TF50KS-E2C,TF50KS-E
F70NA
F240AC/F220-VP,
FV230A1,PA220AG,
HP220A
PD150R, PD160R
F5041, F5051, P5045,
P5055
KF50, KP440
KT55F20, KT58F20, KT55HS
P300, P350, P530
Caution:
Please use the recommended reference paper type or its equivalents. Using the lower quality

paper types might affect the print quality and shorten print-head life.
If the paper is contaminated by chemical or oil, it may discolor or lose heat sensitivity at the

polluted spot.
Do not rub the paper surface strongly against hard objects, otherwise it may discolor.

When the temperature goes up to 70 degrees centigrade, paper will discolor.

Don't use or store paper under high temperature, high humidity and strong light conditions.

2.3.2 Mark paper
In mark paper mode, BTP-R880NP determines the cut position and the initial printing position by
referencing the position of the black mark. Black marked paper should meet the following requirement
besides that of standard paper.
3mm≤L (mark width)≤13mm.

1
L (mark length) ≥10mm.

2
20mm≤L

3
Mark position: left side (only 80mm paper available) or middle of paper.

Reflectivity: The reflectivity of the black mark must be less than 15% while the reflectivity of the

paper itself exceeds 85%. There shall be no printed objects like text and images in the area
between the black marks.
Paper type
(distance between two marks) <500mm.
Manufacturer
Nippon Paper Industries Co., Ltd.
FUJI PHOTO FILM Co., Ltd.
Mitsubishi Paper Mill Co., Ltd.
OJI Paper Co., Ltd.
Mitsubishi HitTec Paper Flensburg
GmbH
Kanzan Spezialpapiere GmbH
Papier-fabrik August Koehler AG
Kanzaki Specialty Paper
- 4 -
BTP-R880NP User's Manual