Power On Printer And Print Self-Test Page - Orient BTP-R880NP User Manual

4.8.2 Remaining paper amount adjustment of Paper near end sensor
Remaining paper amount can be adjusted by adjusting the position of paper near end sensor Paper
near end sensor has six levels, the red mark (actual color on printer is white) shows the current level
and it can be adjusted to a different position by moving the click-wheel.

4.9 Power on printer and print self-test page

4.9.1 Power on printer
Confirm that the printer is connected to power.
4.9.2 Print self-test page
1) Confirm that the printer is connected to power and paper roll is loaded.
2) Confirm that the printer is switched off.
3) Press down the FEED button while turning on the printer power. The configuration page. At the end of
the configuration page the followings text will appear: "Press feed key to continue" The printer is
holding and waiting for the input while the PAPER LED is flashing.
4) Press down the FEED button momentarily, the printer will print a character test page which is a part of
the self-test.
- 12 -
BTP-R880NP User's Manual