Asko D1976 Service Manual page 2

Date
2000-06
PROGRAMS
PROGRAM
Pots and pans/Sani
Super
Normal
Light
Quick
Rinse & hold
Plate warm
*
The Pots and Pans/Sani, Super and Normal programs can be programmed for an extra rinse (see
page 4). In that case, the temperatures for the next-to-last rinse would be the household water
temperature and the final rinse would be the last rinse temperature indicated in the table on page 3.
OPTIONS
Time Delay
Economy
Heat Dry
Fan Cool
Temp Select
Start/Stop
PROGRAMS
DEFINITION
Two prewashes, main wash, three rinses* and drying.
Two prewashes, main wash, two rinses* and drying.
Two prewashes, main wash, two rinses* and drying.
One prewash, main wash, two rinses, drying.
One short prewash, short main wash, two rinses.
One rinse without heat at 131°F (55°C). If Heat fan dry is selected, the
heating element will activate. Drying: 158°F (70°C)
Activates the heating element.
Each press of this touchpad delays the start by one hour, up to 12 hours. The
number of hours is displayed in the LED window. After you select the hours,
press Start. To cancel, press the Delay touchpad until the LED displays
zero then press Start.
When used with low temperature settings, saves energy by extending the wash time.
Activates the fan for an additional 30 minutes after the drying cycle to cool the dishes.
Pressing this touchpad activates the heating element for 12 minutes after the final
rinse. (158° F/70° C)
Lets you select the water temperature for the wash programs (except Rinse.) The
indicator light glows when it's on the High setting and remains off when set on
Low. The LED displays the temperatures in Celsius. Refer to the table on the next
page for the temperature options and conversions to Fahrenheit.
Press this touchpad to Start or Stop the machine. To interrupt a program, hold this
touchpad down for three seconds.
Model D1976
(DW 955)
Page
2