Table of Contents
Advertisement
DSS Console <FP3>
To program a BLF/DSS button:
1. On the DHS, press [STA], then chg.
2. Dial the Station number.
3. Press [save]
OR
1. On the DHS-E, Press [DIR]. The display shows:
2. Dial the station number.
3. Press [save]
To program a system feature:
1. On the DHS, press soft key [feat], then [chg].
2. Dial the Feature code number.
3. Press [save]
OR
1. On the DHS-E, press soft key [feat]. The display shows:
2. Press [FEAT]. F will appear on the display:
3. Dial the feature code.
4. Press [save]
To erase the contents of a programmable feature button:
1. Press [save] instead of dialing a code.
Conditions
In some cases, a user may program a feature button for a specific CO line although
access is restricted to that line via system programming. In this situation, the
telephone is still governed by system programming and would still be unable to
access the CO line if restricted.
Valid feature codes must be in the form of either Fn or Fnn where F is the feature
button and n is either a 1-digit or 2-digit code, including asterisk [✳] and pound [#]
dialed from the key pad.
DI R N O. : 10 2
bk sp save chg
FTR COD E:__
bk sp save chg
FTR COD E: F50
bk sp save chg
If you dial an invalid code, you will hear error tone and an Executive Key Telephone display
will show CODE UNAVAILABLE.
4-51
Advertisement
Table of Contents
