Pioneer DXT-1469UB Owner's Manual page 3

Operating this unit
Head unit
12 3 4 5 6
7 8 9 a b c de
Part Part
1 h (eject) 8 (back)
2 (list) 9
c/d
MULTI-CONTROL
3 a
BAND
(M.C.)
4 b
SRC/OFF 1/ to 6/
5 c
Disc loading slot /DISP OFF
AUX input jack
6 d
USB port (3.5 mm stereo
jack)
7 (EQ) e Detach button
CAUTION
! Use an optional Pioneer USB cable (CD-
U50E) to connect the USB audio player/USB
memory as any device connected directly to
the unit will protrude out from the unit and
may be dangerous.
! Do not use unauthorized products.
Remote control
f
9
g
a
h
m
i
l
4 j
k
Part Operation
Press to increase or decrease
f VOLUME
volume.
Press to mute. Press again to
g MUTE
unmute.
Press to recall preset stations.
h
Press to select the next/pre-
a/b
vious folder.
Press to select an audio func-
i
AUDIO
tion.
Press to select different dis-
j
DISP/SCRL
plays.
Press to pause or resume
k
e
playback.
l FUNCTION Press to select functions.
Press to display the disc title,
track title, folder, or file list de-
pending on the source.
m
LIST/ENTER Press to display the list de-
pending on the source.
While in the operating menu,
press to control functions.
Operating this unit
Display indication
1
3 5 6
2 4
Indicator State
! Tuner: band and fre-
quency
Main dis-
1
! Built-in CD player and
play section
USB: elapsed playback
time and text information
The list function is being oper-
2
(list)
ated.
3 LOC
Local seek tuning is on.
4
(repeat) Track or folder repeat is on.
(ran-
5 Random play is on.
dom)
The sound retriever function
6
(sound re-
is on.
triever)
Set up menu
When you turn the ignition switch to ON after in-
stallation, set up menu appears on the display.
You can set up the menu options below.
1 After installation of this unit, turn the
ignition switch to ON.
SET UP appears.
2 Turn M.C. to switch to YES.
# If you do not operate for 30 seconds, the set up
menu will not be displayed.
# If you prefer not to set up at this time, turn M.C.
to switch to NO.
If you select NO, you cannot set up in the set up
menu.
3 Press M.C. to select.
4 Perform the following procedures to set
the menu.
To proceed to the next menu option, you need to
confirm your selection.
CLOCK SET (setting the clock)
1 Turn M.C. to adjust hour.
2 Press M.C. to select minute.
3 Turn M.C. to adjust minute.
4 Press M.C. to confirm the selection.
FM STEP (FM tuning step)
The FM tuning step employed by seek tuning can
be switched between 100 kHz, the preset step,
and 50 kHz.
! If seek tuning is performed in 50 kHz steps,
stations may be tuned in imprecisely. Tune in
the stations with manual tuning or use seek
tuning again.
! The tuning step remains at 50 kHz during man-
ual tuning.
1 Turn M.C. to select the FM tuning step.
50 (50 kHz)—100 (100 kHz)
2 Press M.C. to confirm the selection.
AM STEP (AM tuning step)
The AM tuning step can be switched between
9 kHz, the preset step, and 10 kHz. When using the
tuner in North, Central or South America, reset
the tuning step from 9 kHz (531 kHz to 1 602 kHz al-
lowable) to 10 kHz (530 kHz to 1 640 kHz allowable).
1 Turn M.C. to select the AM tuning step.
9 (9 kHz)—10 (10 kHz)
2 Press M.C. to confirm the selection.
Section
02
3
En