Sony MSW-A2000 Installation Manual page 13

15. Check that the two intermediate rails attached to the
rack are parallel.
Intermediate rails
Width : A = A' = 416 mm
16. To fix the two outer rails to the rack, fully tighten the
eight loosely fitted hexagon socket head cap screws in
step 12 using the L-shaped hexagon wrench.
MSW-A2000
MSW-A2000P
A
A'
. Mounting in rack
c
Be sure to carry the unit by the two persons or more.
17. Slide each ball retainer of intermediate rails on both
sides (left and right) in the direction of the arrow.
Ball retainer
18. Pull equal length of each rail on both sides out.
19. Lift the unit holding the gripes on both sides, slowly
insert the inner rails into the intermediate rails.
20. While pressing each stopper of inner rails on both
sides, slowly push the unit into the rack.
n
Be careful not to catch your finger or hand in rack
mount rail.
Stopper
Inner rail
1-6. Rack Mounting
Intermediate rail
Intermediate rail
Stopper
1-7