SoftBank 815SH User Manual page 175

Precautions for Portrait Capture
3 Look straight into lens and frame whole face with no
expression; adjust face size (may not be saved if too small).
Stay still until shooting is completed.
3 Do not wear a mask when capturing portraits, even for use
with Low(Mask) (P.9-22 "Security Level").
I
^ Saving multiple portraits increases recognition
Tip
accuracy. However, security will be compromised.
^ A person's portraits can be saved to multiple users; this
may increase recognition accuracy.
Activating & Canceling
^ Save a user beforehand.
^ Face Recognition is Off by default.
I A
Settings Phone Settings (F)
Main Menu
A
Recognition Switch On/Off
1 Choose On or Off and press b
2 Enter Handset Code and press b
Scanning Face
Clean dust/smudges from lens cover of Internal Camera
with a soft cloth before use.
1
Face the Display
^ To show operational tips, select Panda in Conductor Setting
(P.9-22).
^ Handset is unlocked when your face matches saved portrait.
^ When Face Recognition fails, Under Pwd Key Lock. appears
activating Password Lock.
Unlocking Handset after Face Recognition Fails
3 When saved question appears, press b
answer
B To retry to answer, press b
B To use Handset Code instead of retrying to answer,
A A
Locks Face
3 If no question or answer is saved, press b
Handset Code
^ To retry Face Recognition, press N k.
3 Press M while handset is locked to open saved contact
information (P.9-22 "Report").
A Press b
A
Enter the answer
press g A Press b A
Enter Handset Code
A Press b
Opening Contact Information
9
A
Enter the
A Press b
A Press b
A
Enter
9-21