Face Arrange - SoftBank 815SH User Manual

Face Arrange

^ Apply to JPEG and PNG images.
^ Face Arrange may not fit all images. Adjust position and size
as required (below).
^ Open Picture Editor window (P.8-10) and follow these steps.
1 Select Face Arrange and press b
2 Select a type and press b
3 To check current positions of targets, press N ;.
B Press i to return.
8
3 To start over, press i.
3 Press b
3
Saving Edited Images: P.8-10
I
Note When using Face Arrange, take care not to create images
that may embarrass or offend others. Always obtain
permission before photographing others.
Adjusting Face Arrange Position
Change the default positions and sizes of targets to fit the
image. Changes apply to the current image only.
1 In Step 2 above, press N ;
8-12
2 Press N u
A rectangle appears with + in the upper left corner.
3
Set the face line
b
Use G to move
Use G to move
+ to the upper
+ to the lower
left corner
right corner
3 To start over, press i.
4
Set the eyes and then mouth in the same way
b
Set eye
(right of image) (left of image)
^ When finished, all the targets appear.
^ To readjust targets, start over from Step 2.
To restore the original positions, press i. (Not available
3
after setting mouth position.)
b
Face line is set
b
Set eye Set Mouth