Muffler Section Disassembly And Assembly - Makita EA3200S Technical Information

R
epair
[2] DISASSEMBLY/ ASSEMBLY
[2]-4. Muffler section
Note: • Wear gloves for safety.
• Be careful that Muffler stays very hot for a while after running the engine.
DISASSEMBLING
(1) Remove Sprocket guard, Guide bar and Saw chain from machine.
(2) Unscrew M5x40 Hexalobular socket head bolt and two M5x16 Hexalobular socket head bolts as drawn in Fig. 9,
and then disassemble Muffler section as drawn in Fig. 10.
Fig. 9
*Spark arrester screen
Fig. 10
M5x16 Hexalobular
socket head bolt (2 pcs.)
Connecting link
Cooling plate
ASSEMBLING
Assemble the components of Muffler section by reversing the disassembling procedure.
Be careful to each direction.
*Muffler (Inner)
*Muffler (Center)
*Muffler (Outer)
M5x40 Hexalobular
socket head bolt
M5x16 Hexalobular
socket head bolt (2 pcs.)
Muffler complete
Gasket
*The components of
Muffler complete
(Refer to Fig. 10.)
Muffler section
P 5/ 15