AKG DMM14 U Reference Manual page 81

Automatic microphone mixer
Table of Contents

Advertisement

Available languages

Available languages

Description
Gain controller
Phantom power
DMM14 MANUAL
5.4.2
Gain control
0 dB
0 dB
IN 1
Figure 4: Gain controller
The associated gain control is located next to every input channel (2, 4, 7,
9, 12, 14, 19, 21, 24, 26, 29, 31) to set the input level. The gain controls are
equipped with integrated switch for the left side stop.
The input level is set at 0 dB when the left end stop is reached. By turning
the control clockwise the gain can be increased by max. 57 dB.
5.4.3
Phantom power
IN 1
Figure 5: Phantom power
The device is equipped with six switches for phantom power (3, 8, 13, 20,
25, 30).
The corresponding slide switch activates the phantom power supply of
+48 V for the inputs located on the left and right.
The slide switch is labeled PHANT. PWR. Two input channels are always
activated simultaneously. The phantom power is activated when the slide
switch is in the On position.
The corresponding slide switch activates the phantom power supply of
+48 V for the inputs located on the left and right.
57 dB
57 dB
IN 2
Off
On
PHANT. PWR
IN 2
Off
On
PHANT. PWR
81

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dmm14 ulDmm14 uld

Table of Contents