Table of Contents
Advertisement
Using Flash (Flash)
1.
In the REC mode, press [2] (
once.
2.
Select the flash setting you want and then press [SET].
Setting
>
Auto Flash
?
Flash Off
<
Flash On
¥
Red Eye
Reduction
3.
Press the shutter button to shoot.
< indicates the flash will fire.
• For information about Flash Range, see page 237.
REC Screen
Description
Icon Display
Flash fires automatically in accordance with
None
exposure (amount of light and brightness)
conditions.
Flash does not fire.
Flash always fires. This setting can be used to
brighten a subject that normally comes out dark
due to daylight or backlight (daylight synchro
flash).
Flash fires automatically. This type of flash can
be used to reduce the chance of redness in the
subject's eyes.
Back lamp
Flashes amber while the flash is charging to
indicate that image recording is disabled.
• You will not be able to take another flash
)
Flash
snapshot until the lamp stops flashing amber,
which indicates that charging is complete.
52
[2] (
)
Snapshot Tutorial
Advertisement
Table of Contents
