Intended Use; Technical Data; Declaration Of Conformity - Bosch PST 700 E Original Instructions Manual

OBJ_BUCH-1067-005.book Page 10 Monday, November 3, 2014 11:55 AM
10 | English
Symbol Meaning
Movement direction
Reaction direction
Next step of action
Prohibited action
Correct result
Extraction
Sawdust blower device
Switching On
Switching Off
On/Off switch lock-on
Low stroke rate
High stroke rate
When sawing metal, apply coolant/
lubricant alongside the cutting line.
Article number (10-digit)
P Rated power input
1
n Stroke rate at no-load
0
Cutting depth, max.
Wood
Aluminium
Metal
Particle board
Weight according to
EPTA-Procedure 01/2003
1 609 92A 0R4 | (3.11.14)
Symbol Meaning
Symbol for protection class II
/II
(completely insulated)
L Sound pressure level
pA
L Sound power level
wA
K Uncertainty
a Vibration total value
h
Delivery Scope
Jigsaw.
"Cut Control", splinter guard, application tools and other ac-
cessories shown or described are not part of the standard de-
livery scope.
A complete overview of accessories can be found in our ac-
cessories program.

Intended Use

The machine is intended for making separating cuts and cut-
outs in wood, plastic, metal, ceramic plates and rubber while
resting firmly on the workpiece. It is suitable for straight and
curved cuts with mitre angles to 45°. The saw blade recom-
mendations are to be observed.

Technical Data

The technical data of the machine are listed in the table on
page 67.
The values given are valid for a nominal voltage [U] of 230 V.
For different voltages and models for specific countries,
these values can vary.

Declaration of Conformity

We declare under our sole responsibility that the product de-
scribed under "Technical Data" is in conformity with all rele-
vant provisions of the directives 2011/65/EU, 2014/30/EU,
2006/42/EC including their amendments and complies with
the following standards: EN 60745-1, EN 60745-2-11.
Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ETM9,
70764 Leinfelden-Echterdingen, GERMANY
Henk Becker Helmut Heinzelmann
Executive Vice President Head of Product Certification
Engineering PT/ETM9
Robert Bosch GmbH, Power Tools Division
70764 Leinfelden-Echterdingen, GERMANY
Leinfelden, 09.10.2014
Bosch Power Tools