Bluetooth; Recognition) - Chevrolet Silverado 2014 Infotainment System

96 Infotainment System
3. When the second call is active,
press Merge to conference the
three-way call together.
4. Once all calls are merged, the
Merge button becomes an
Unmerge button. Press to
unmerge the calls. Some
wireless service carriers may not
allow a merged call to become
unmerged.
Ending a Call
i
Press on the steering wheel
controls.
Press End on the center stack
display to end all existing calls,
or press End next to a call to
end only that call.
Some wireless service carriers may
not allow a merged call to become
unmerged.
Dual Tone Multi-Frequency
(DTMF) Tones
The in-vehicle Bluetooth system can
send numbers during a call. This is
used when calling a menu-driven
phone system.
1. Press the Phone screen button.
2. While in the Call View, press
to raise the Interaction Selector.
3. Select Keypad and enter the
number.
Voice Mail
The default voice mail number is the
phone number of the currently
connected phone. The voice mail
number can be changed in
Bluetooth settings.
To dial a voice mail number:
1. Press the Phone screen button.
2. Select Voice Mail.
3. Select Call.
4. Enter the DTMF tones using the
keypad if needed.
Bluetooth (Voice

Recognition)

Using Bluetooth Voice
Recognition
To use voice recognition, press the
g
button on the steering wheel. Use
the commands below for the various
l
voice features. For additional
information, say Help while in a
voice recognition menu. See Voice
Recognition on page 83 for help
using voice recognition commands.
Making a Call
Calls can be made using the
following commands.
Using the Dial or Call
Command
To call a number:
g
1. Press . The system responds
Command Please, followed by
a tone.
2. Say Dial or Call followed by
the complete phone number.