Chevrolet Silverado 2014 Infotainment System page 39

Software Information
This allows access to Version
information, Save Vehicle Info to
USB, and view Open Source.
Save Vehicle Info to USB allows the
current version to be saved to a
jump drive, which must be done
before an update can be performed.
Open source software provides
where software information can be
found.
Changing Between SCREEN 1 and
SCREEN 2
Only one source can be viewed on
the overhead screen at a time.
Either screen can access any
available source.
Press the SCREEN 1 or SCREEN 2
button on the remote control to
change between which source will
display on the overhead screen.
When SCREEN 1 is being displayed
and the SCREEN 2 button on the
remote is pressed, the source for
SCREEN 2 will be displayed. The
audio for SCREEN 1 is available on
channel 1 of the headphones and
the audio for SCREEN 2 is available
on channel 2 of the headphones.
Change the channel on the
headphones to the desired screen
source.
One user can listen to the audio
from SCREEN 1 and view the
source on the overhead display
while another user can listen to a
separate audio source by changing
the channel on the wireless
headphones or setting their wired
headphones to SCREEN 2 in
the MENU.
RSE Controls Available from
the Front Screen
To access the RSE application,
select Video from the HOME
screen. The Video app may also be
selected from the applications tray if
it has been stored in one of the five
locations.
Infotainment System
Sourcing to DVD/BD
Allows for watching a BD/DVD video
on the front screen when the vehicle
is in P (Park).
After a disc is inserted, it will
automatically begin playing on both
rear screens. If no video disc is
inserted or if the disc is ejected
while it is sourced to DVD/BD, the
screen will display No Video Disc
Inserted.
With the vehicle in P (Park), the
following icons will appear along the
bottom of the front screen when a
DVD, VCD, USB, AUX, or SD is
inserted:
39