Flow Chart For Adjustment - Hitachi 50V500 Service Manual

LC37/LC37F
III. ASSEMBLED P.W.B. ADJUSTMENT

3.1.3 FLOW CHART FOR ADJUSTMENT

(1) CONFIRM TRAPEZOID.
(2) IF OUT OF SPEC, ADJUST TRAPEZOID REFER TO 3.1.4 (1) TRAPEZOID DISTORTION.
(3) CONFIRM TILT.
(4) IF OUT OF SPEC, ADJUST TILT REFER TO 3.1.4 (2) TILT.
(5) CONFIRM VERTICAL POSITION.
(6) IF OUT OF SPEC, ADJUST VERTICAL POSITION REFER TO 3.1.4 (3) VERTICAL POSITION.
2
(7) WHEN STILL OUT OF SPEC, ADJUST VERTICAL POSITION BY I C MENU.
(8) CONFIRM HORIZONTAL POSITION.
(9) IF OUT OF SPEC, ADJUST HORIZONTAL POSITION REFER TO 3.1.4 (4) HORIZONTAL POSITION.
2 2
(10) WHEN STILL OUT OF SPEC, ADJUST HORIZONTAL POSITION BY I C MENU.
3.1.4
53
BACK TO ADJUSTMENTS