Related Manuals for Elka TERRA 180
Summary of Contents for Elka TERRA 180
- Page 1 Installation and operating instructions Swing Gate Opener TERRA 180/182 – TERRA 250/252 – TERRA 320/322...
-
Page 2: Table Of Contents
9. Safety contact profiles for gate open (SLA) and close (SLZ)________________________________________35 10. Additional functions and additional modules ___________________________________________________36 11. Power failure ______________________________________________________________________________37 12. Fault diagnosis ____________________________________________________________________________37 13. Technical data MO36 _______________________________________________________________________38 © 14.11.2005 ELKA-Torantriebe GmbH u. Co. Betriebs KG Page 2 TERRA 180/182 - 250/252 – 320/322... -
Page 3: Safety Relevant Rules And Regulations
European standards. Symbols: WARNING! Danger of harm to people and objects INFORMATION! Important information for installation and operation REMARK! Remarks for the installation © 14.11.2005 ELKA-Torantriebe GmbH u. Co. Betriebs KG Page 3 TERRA 180/182 - 250/252 – 320/322... -
Page 4: General Notes Of Safety
All alterations or extensions to the appliance must be carried out with parts which ELKA Torantriebe GmbH u. Co. Betriebs KG have defined as suitable for such alterations, and be carried out by qualified personnel. -
Page 5: Usage
2,500mm, but are recommended for position CLOSED. © 14.11.2005 ELKA-Torantriebe GmbH u. Co. Betriebs KG Page 5 TERRA 180/182 - 250/252 – 320/322... -
Page 6: Installation Dimensions (Example)
Please make sure, that the gate wings can be moved easily and that the axis of rotation is in a completely vertical position. End stops for gate OPEN and CLOSED are required for wings of 2,500mm and larger. © 14.11.2005 ELKA-Torantriebe GmbH u. Co. Betriebs KG Page 6 TERRA 180/182 - 250/252 – 320/322... -
Page 7: Installation
(conduit) has to be assured all the way to the joint box. Use a suitable cable from the joint box onward. Grommet Drawing 3 © 14.11.2005 ELKA-Torantriebe GmbH u. Co. Betriebs KG Page 7 TERRA 180/182 - 250/252 – 320/322... -
Page 8: Tools Needed
Torque wrench 30 – 50Nm Allen key 6mm matching the above Extension piece 100mm for torque wrench Allen key 4mm (ball-ended) Installation bolts on site. © 14.11.2005 ELKA-Torantriebe GmbH u. Co. Betriebs KG Page 8 TERRA 180/182 - 250/252 – 320/322... -
Page 9: Installation At The Gate And Gate Post
Metal posts: You pre-mount the gate opener onto the gate at your workshop completely and install this unit on site. © 14.11.2005 ELKA-Torantriebe GmbH u. Co. Betriebs KG Page 9 TERRA 180/182 - 250/252 – 320/322... -
Page 10: Emergency Release
Push the emergency release lever up. Turn the key 90° clockwise. Remove the key and close the cover of the cylinder lock. Move the gate until the emergency release engages. © 14.11.2005 ELKA-Torantriebe GmbH u. Co. Betriebs KG Page 10... -
Page 11: Installation At The Gate
The pivot point of the gate is located between these tapholes. Pivot point Drawing 7 We recommend the use of the upper hinge-set. Emergency release Driver plate Drawing 8 © 14.11.2005 ELKA-Torantriebe GmbH u. Co. Betriebs KG Page 11 TERRA 180/182 - 250/252 – 320/322... -
Page 12: Checking Of The Movement
OPEN and CLOSED. Engage the release in any chosen gate position. When the gate is moved again, the nosing engages automatically (original installation position). Now the gate opener and the gate wing are connected again. © 14.11.2005 ELKA-Torantriebe GmbH u. Co. Betriebs KG Page 12 TERRA 180/182 - 250/252 – 320/322... -
Page 13: Adjusting Of The Internal Stops With The Mo36
TERRA 180/182 TERRA 250/252 TERRA 320/322 Table 2 Nosing support Ring stoppers Interneral stop Internal nosing Adjustment clip Gear shaft Drawing 10 © 14.11.2005 ELKA-Torantriebe GmbH u. Co. Betriebs KG Page 13 TERRA 180/182 - 250/252 – 320/322... - Page 14 Now you can reach the 8 countersunk-screws (by 6mm allen key). These screws must be tightened by a torque wrench with 45 Nm. Use the torque wrench to fix the internal stops! © 14.11.2005 ELKA-Torantriebe GmbH u. Co. Betriebs KG Page 14 TERRA 180/182 - 250/252 – 320/322...
- Page 15 4.7. – Re-adjusting of internal stops. r. Continue with paragraph 4.5. For additional options for adjusting of the controller see paragraph 8.1. © 14.11.2005 ELKA-Torantriebe GmbH u. Co. Betriebs KG Page 15 TERRA 180/182 - 250/252 – 320/322...
- Page 16 Now you can reach the 8 countersunk-screws (by 6mm allen key). These screws must be tightened by a torque wrench with 45 Nm. Use the torque wrench to fix the internal stops! © 14.11.2005 ELKA-Torantriebe GmbH u. Co. Betriebs KG Page 16 TERRA 180/182 - 250/252 – 320/322...
- Page 17 4.7. – Re-adjusting of internal stops. v. Continue with paragraph 4.5. For additional options for adjusting of the controller see paragraph 8.1. © 14.11.2005 ELKA-Torantriebe GmbH u. Co. Betriebs KG Page 17 TERRA 180/182 - 250/252 – 320/322...
-
Page 18: Removing Of Adjustment Clip
Push button BT a few times until the diplay shows PP. Push button LERN. The selection is now active. Save the adjustment clip with the manual. Do not dispose of the adjustment clip! © 14.11.2005 ELKA-Torantriebe GmbH u. Co. Betriebs KG Page 18 TERRA 180/182 - 250/252 – 320/322... -
Page 19: Mounting Of Cover Plate
The seal between cover plate and housing is to be inserted according to the drawing. Now the fastening screws can be tightend crosswise -step by step- completely. © 14.11.2005 ELKA-Torantriebe GmbH u. Co. Betriebs KG Page 19 TERRA 180/182 - 250/252 – 320/322... -
Page 20: Re-Adjusting Of Internal Stops
Continue with paragraph 4.4.2.g (gates with on wing) or 4.4.3.g (gates with two wings). Nosing stoppers Internal stop Countersunk-screws M10x25 Torque 45Nm Drawing 14: Turning of the nosing stoppers (see 4.7.h.) © 14.11.2005 ELKA-Torantriebe GmbH u. Co. Betriebs KG Page 20 TERRA 180/182 - 250/252 – 320/322... -
Page 21: Installation Example
To avoid mistakes please use marked (colour) or numbered leads within the 5-leads cable. © 14.11.2005 ELKA-Torantriebe GmbH u. Co. Betriebs KG Page 21 TERRA 180/182 - 250/252 – 320/322... -
Page 22: Connection Plan Of The Controller Mo36
24Vdc motor with pulser AMPEL MULTI 230Vac/max. 60W WARN 230Vac/max. 60W green traffic light 230Vac red traffic light 230Vac 230Vac Drawing 16 © 14.11.2005 ELKA-Torantriebe GmbH u. Co. Betriebs KG Page 22 TERRA 180/182 - 250/252 – 320/322... - Page 23 Lights when the contact is closed Green Lights when LSA is interrupted Green Lights when LSI is interrupted Display 2 x 7-segment-display Table 7 © 14.11.2005 ELKA-Torantriebe GmbH u. Co. Betriebs KG Page 23 TERRA 180/182 - 250/252 – 320/322...
- Page 24 LS-TEST 1 pin 24Vdc for photo-cell transmitter 1 pin Earth AMPEL 2 pin Socket for traffic light module AMO34A red / green Table 8 © 14.11.2005 ELKA-Torantriebe GmbH u. Co. Betriebs KG Page 24 TERRA 180/182 - 250/252 – 320/322...
-
Page 25: Programming Mo36
Selecting pressure relief of electromagnetic bolt Selecting wind blast suppression Selecting mode of multi-functional relay Return to original settings Saving of data and returning to regular mode Table 9 © 14.11.2005 ELKA-Torantriebe GmbH u. Co. Betriebs KG Page 25 TERRA 180/182 - 250/252 – 320/322... -
Page 26: Sequence P1: Learning Of The Running Distance
Remark: After adjustment of the end stoppers, the wings should not be in either end position but at least 50cm before. The first movement is into direction open. © 14.11.2005 ELKA-Torantriebe GmbH u. Co. Betriebs KG Page 26 TERRA 180/182 - 250/252 – 320/322... -
Page 27: Sequence P2: Adjusting Of Force And Speed
Return to the learning sequence using button LERN. Remark: When a time lag is selected for gates with one wing, it will not be in effect. © 14.11.2005 ELKA-Torantriebe GmbH u. Co. Betriebs KG Page 27 TERRA 180/182 - 250/252 – 320/322... -
Page 28: Sequence P5: Learning And Deleting Of Code For Radio Remote Control For Bt, Btg And Multi
When the SLZ is not activated anymore and the stay- open time has elapsed, the warning time prior to closing starts. © 14.11.2005 ELKA-Torantriebe GmbH u. Co. Betriebs KG Page 28 TERRA 180/182 - 250/252 – 320/322... -
Page 29: Sequence P7: Automatic Closure For Pedestrian Wing
After hitting the obstacle for the second time the gate will reverse for a short distance and stop. The counting will be erased when using BT, BA, or BZ. © 14.11.2005 ELKA-Torantriebe GmbH u. Co. Betriebs KG Page 29 TERRA 180/182 - 250/252 – 320/322... -
Page 30: Sequence P8: Warning Prior To Opening And Closing
With the button BT the value can be selected (see table). Return to the learning sequence using button LERN. transmitter receiver pedestrian main wing wing receiver transmitter Drawing 17 © 14.11.2005 ELKA-Torantriebe GmbH u. Co. Betriebs KG Page 30 TERRA 180/182 - 250/252 – 320/322... -
Page 31: Sequence Pa: Photo-Cell Testing
MO36. Therefore add all n.c. relay contacts of the receivers in serial. Parallel to each relay contact you must add a 1 kΩ resistor (resistors are needed only when photocell test is used). © 14.11.2005 ELKA-Torantriebe GmbH u. Co. Betriebs KG Page 31 TERRA 180/182 - 250/252 – 320/322... - Page 32 Corresponds to: Photo-cell testing deactivated Photo-cells, which have past the LS-Test during sequence P1, will execute photo- cell testing also in regular mode. Table 19 © 14.11.2005 ELKA-Torantriebe GmbH u. Co. Betriebs KG Page 32 TERRA 180/182 - 250/252 – 320/322...
-
Page 33: Sequence Pb: Lockage Function For The Photo-Cells
When the photo-cell is interrupted, closing of the gate wing / wings is only possible, when the vehicle / person has passed both (LSA and LSI) photo-cells. Table 20 © 14.11.2005 ELKA-Torantriebe GmbH u. Co. Betriebs KG Page 33 TERRA 180/182 - 250/252 – 320/322... -
Page 34: Sequence Pc: Pressure Relief Of Electromechanical Bolt
Funk BTG, BA or BZ are pushed. 3-minute light: The relay is active for 180 seconds, when BT, Funk BT, BTG, Funk BTG, BA or BZ are pushed. Table 23 © 14.11.2005 ELKA-Torantriebe GmbH u. Co. Betriebs KG Page 34 TERRA 180/182 - 250/252 – 320/322... -
Page 35: Sequence Pf: Return To Original Settings
8,2kO profile for gate profile for gate OPEN OPEN safety contact safety contact 8,2kO profile for gate profile for gate CLOSE CLOSE Drawing 20 © 14.11.2005 ELKA-Torantriebe GmbH u. Co. Betriebs KG Page 35 TERRA 180/182 - 250/252 – 320/322... -
Page 36: Additional Functions And Additional Modules
Gate position Red traffic light Green traffic light Gate is completely open Gate is not open (it is moving, partially open, or closed) Table 25 © 14.11.2005 ELKA-Torantriebe GmbH u. Co. Betriebs KG Page 36 TERRA 180/182 - 250/252 – 320/322... -
Page 37: Power Failure
The pedestrian wing pulser is faulty. Check the wiring between the opener and controller. Power supply Uext has a short cut. OR At least one wing is released. Check the emergency release. Table 26 © 14.11.2005 ELKA-Torantriebe GmbH u. Co. Betriebs KG Page 37 TERRA 180/182 - 250/252 – 320/322... -
Page 38: Technical Data Mo36
8,2kΩ Radio remote control code BT X-code - + - + - + - + - All other radio remote control codes X-code deleted © 14.11.2005 ELKA-Torantriebe GmbH u. Co. Betriebs KG Page 38 TERRA 180/182 - 250/252 – 320/322...