Select The Best Location - LG AS-W096E1G0 Engineering Product Data Book

14. Installation

Select the best Location

Indoor unit
1. Do not have any heat or steam near the unit.
2. Select a place where there are no obstacles in front
of the unit.
3. Make sure that condensation drainage can be
conveniently routed away.
4. Do not install near a doorway.
5. Ensure that the interval between a wall and the left
(or right) of the unit is more than 100mm. The unit
should be installed as high as possible on the wall,
allowing a minimum of 200mm from ceiling.
6. Use a metal detector to locate studs to prevent
unnecessary damage to the wall.
Install the indoor unit on the wall where the height from the floor is more than 2.3 meters.
Outdoor unit
1. If an awning is built over the unit to prevent direct
sunlight or rain exposure, make sure that heat
radiation from the condenser is not restricted.
2. Ensure that the space around the back and sides is
more than 300mm. The front of the unit should have
more than 700mm of space.
3. Do not place animals and plants in the path of the
warm air.
4. Take the weight of the air conditioner into account
and select a place where noise and vibration are
minimum.
5. Select a place where the warm air and noise from the
air conditioner do not disturb neighbors.
92 2008 Product Data
More than
100mm
More than 2300mm
More than 600mm
More than 300mm
More than 700mm
More than 200mm
More than
100mm
More than 300mm
More
than 600mm