Transporting Your Buzzaround Xl - Golden Technologies Buzz around XL GB146 Owner's Manual

Buzzaround XL_Owner's Manual
IX. TRANSPORTING YOUR Buzzaround XL™
All Golden Buzzaround XL scooters can be equipped with docking devices for
loading onto a vehicle by means of a mechanical lift or hoist. Contact your Golden
Technologies, Inc. dealer for more information concerning docking devices and scooter lift
devices.
To Transport Your Buzzaround XL:
• Disassemble or fold down the seat and tiller (see section VII. "Disassembly") as close as
possible to the loading area of the vehicle to be used for transporting your scooter.
• The degree to which you disassemble your Buzzaround XL or fold the seat and tiller
depends on the size and shape of the cargo area of the transporting vehicle.
• Moving blankets or other forms of padding may be used to protect your Buzzaround XL
during transportation.
• Do not lift your Buzzaround XL by its plastic body parts or dash. Breakage of these parts
is not covered by the warranty.
• Do not use the tires or wheels to lift the rear carriage. The carriage may rotate and cause
injury or damage.
If your scooter and its components are not properly and securely stowed
during transportation, the scooter or the components may move or become airborne and
cause injury or damage.
Never sit on your Buzzaround XL when it is being transported. Secure with an
approved tie-down system.
If transporting your scooter on an outside lift, remove seat or make sure
the seat is fasten down s e c u r ely with an approved tie-down system supplied by your
lift manufacturer while transporting your scooter. Failure to do so could result in the
seat coming loose and becoming airborne. This situation could cause problems for the
traffic behind you and possibly result in an injury.
31
Figure 25. Buzzaround XL (Model GB116)
RevE_102414