Viii. Assembly - Golden Technologies Buzz around XL GB146 Owner's Manual

Buzzaround XL_Owner's Manual
Install the Seat
7. Hold the seat on an angle so you can see the seat swivel post underneath.
8. Place the seat swivel post into the seat receiver post as shown in figure 24.
9. Push down on the seat to lock the seat in place. Move the seat from side to side to make
sure it is lock in place.
WARNING! Pinch Point! Keep hands and clothing clear of the seat swivel post and
seat post.
Accident hazard due to non-engaged seat! Ensure that the seat is properly
engaged by turning the seat slightly left and right.
Unlock the Tiller
10. Turn the tiller lock knob counterclockwise 90 degrees to the unlocked position.
See figure 23 on page 29.
IF YOU DON'T UNLOCK YOUR TILLER LOCK KNOB, YOUR TILLER
WILL NOT TURN! THIS COULD CAUSE INJURY.
Accident hazard due to incorrect seat position! Always turn the seat to face forwards
and engage it before driving. If the seat is in any other position, the possibility of tipping is
increased. Before turning the seat, always ensure that the scooter is on an even and solid
surface.

VIII. ASSEMBLY

Figure 24. Installing the Seat
Seat Post
Seat Receiver
RevE_102414
30