Clear Records; Reset; Troubleshooting; Specifications - Oregon Scientific ESM100 User Manual

CLEAR RECORDS

NOTE When total cost reaches 999.99 or total
energy reaches 999.99KWh, digits will flash to indicate
maximum has been reached and the need to clear
records.
To clear records of TOTAL data (Cost / Energy):
• Press and hold UP and DOWN simultaneously.

RESET

Press RESET to return to the default settings.

TROUBLESHOOTING

PROBLEM SYMPTOM
Strange Strange
readings readings
High
readings
REMEDY
Set cost rate setting.
Check appliances are
not malfunctioning
(turned off by itself) as
this could be shown
as a sudden drop in
electricity usage.
Check appliances
have been switched
off if not in use.
"- - - -" Not
displayed synchronised
"0.00" Problem with
displayed the sensor
SPECIFICATIONS
MAIN UNIT
Dimensions
(L x W x H)
Weight
Signal frequency
Transmission
range
Information update
9
Press and hold
CHECK on remote
transmitter.
Then, press and hold
UP on the main unit.
If still unsuccessful,
press RESET on
transmitter and main
unit.
Check sensor clamp
has been properly
fitted and closed.
Possible damage in
the sensor clamp.
Replace clamp with
new one.
66 x 27 x 85 mm
(2.6 x 1.1 x 3.3 inches)
80 g ( 2.8 oz) without battery
433 MHz
30 meters (100 feet)
unobstructed
Approximately every 6 seconds
(EU) / 12 seconds (US / Canada)