In-Car Charger - SoftBank 810P User Manual

1

In-Car Charger

Charging Time: Approximately 160 minutes
Lighter Socket
Plug
1 Connect In-Car Charger to handset
Insert Charger Connector into External Port with the printed
side up.
2
Plug In-Car Charger into lighter socket
If it does not fit, remove it and adjust plug size.
Start car engine.
Charging Indicator illuminates and charging starts.
Charging is complete when Charging Indicator goes out.
1-16
Charging
Indicator
Charger
Connector
Release
Tabs
In-Car Charger
3 When charging is complete, unplug
In-Car Charger, then disconnect handset
Squeeze Release Tabs to remove Charger Connector, and
replace Port Cover.
! Use In-Car Charger in vehicles with a negative earth
(DC12V/24V). Do not use if earth is positive.
! Disconnect In-Car Charger before leaving vehicle.
External
! Do not use In-Car Charger with Desktop Holder.
Port
! Avoid charging battery inside extremely hot vehicles.
Port
Cover