Usim Card Installation - SoftBank 810P User Manual

USIM Card Installation

! Remove battery (ZP.1-13) then follow steps below.
Inserting
Holder
Press on Holder lightly, slide and lift it as shown
1
Lift Holder as shown
2
Insert USIM Card into Holder as shown
3
Replace Holder and slide it in as shown
4
! Holder is secured.
Notch
Removing
To lift Holder, follow Step 1-2 for inserting USIM
1
Card (ZLeft), then grasp top portion (without
touching the IC) and pull gently
! Do not force USIM Card into or out of 810P; may
damage handset/USIM Card.
! Be careful not to lose the removed USIM Card.
! Avoid touching USIM Card terminals or IC chip; doing so
may hinder performance/USIM Card recognition.
! USIM Card Holder edges are sharp; handle carefully to
avoid injuries.
! Do not remove Holder cushion.
1
1-3