Integrated Peripherals - ECS A790GXM-A Manual

38

Integrated Peripherals

This page sets up some parameters for peripheral devices connected to the system.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Onboard SATA Mode
SATA Configuration
Onboard IDE Controller
Onboard AUDIO Function
Onboard LAN1 Function
Onboard LAN2 Function
Onboard LAN Boot ROM
Serial Port1 Address
USB Functions
Onboard SATA Mode (Enabled)
Use this item to enable or disable the onboard SATA mode.
SATA Configuration (Native IDE)
Use this item to show the Serial ATA Configuration options: Disabled, Compatible,
Enhanced.
Onboard IDE Controller (Enabled)
Use this item to enable or disable the onboard IDE interface.
Onboard AUDIO Function (Enabled)
Use this item to enable or disable the onboard Audio function.
Onboard LAN1/2 Function (Enabled)
Use these items to enable or disable the onboard LAN1/2 function.
Onboard LAN Boot ROM (Disabled)
Use this item to enable or disable the booting from the onboard LAN or a network
add-in card with a remote boot ROM installed.
Serial Port1 Address (3F8/IRQ4)
Use this item to enable or disable the onboard COM1 serial port, and to assign a port
address.
USB Functions (Enabled)
Use this item to enable or disable the USB function.
Press <Esc> to return to the main menu setting page.
Integrated Peripherals
Enabled
Native IDE
Enabled
Enabled
Enabled
Enabled
Disabled
3F8/IRQ4
Enabled
: Move Enter : Select +/-/: Value F10: Save ESC: Exit
F1:General Help F9: Optimized Defaults
Using BIOS
Help Item
Options
Disabled
Enabled