Making A Circle Talk Call - SoftBank 911T User Manual

Making a Circle Talk Call

1
In Standby, enter a phone number and press and
hold P
Circle Talk connection is made.
To make a Circle Talk call from the Circle Talk Members List (page
●
20-14), press P in Standby, select an entry, and then press J (CT).
2
Press and hold P to talk
Talk when Myself appears.
● Initiator can talk as soon as Circle Talk is connected.
Myself disappears after 30 seconds and the fl oor is released.
●
Only one person can talk at a time.
●
3
To leave the Circle Talk session, press O→ YES
→@
When only one person remains, the session ends automatically.
●
20
20-12
Tip
k K (Menu) from the Circle Talk Members List to perform the
7 Press
following (available functions vary by list):
Add Members/Edit Group/Delete/Loud Speaker
7 To add or delete members to whom you are making a Circle Talk call at
the same time, perform the following (put check mark(s) to select up to
ten members):
・ Enter a phone number in Standby →
@ → a K (Menu) → Add → k
・ Select a member from the Circle Talk Members List →
k K (Menu) → Add → @ a
→
・ Select a group from the Circle Talk Members List
a @
→ Add/Delete →
Circle Talk Members List can also be displayed from the Main menu by
7
selecting Communications → Circle Talk.
7 Alternatively, initiate a Circle Talk call from:
・Call Log
・Phone Book
・Active Window
・Hot Status Members List
You can make a Circle Talk call from the latest record of dialed Circle
7
Talk call log (page 2-6) to rejoin the Circle Talk session which is still
active. If the session has ended, a confirmation window appears asking
you whether to initiate another Circle Talk call.
K (Menu) → Circle Talk → k
@ a
@ (twice) a
@ K (Menu)
→a →k