Mitsubishi Electric PCFY-P40VKM-E Operation Manual page 5

2. Parts Names
Display
The main display can be displayed in two different modes: "Full" and "Basic". The factory setting is "Full". To switch to the "Basic" mode, change the
setting on the Main display setting. (Refer to operation manual included with remote controller.)
<Full mode>
* All icons are displayed for explanation.
Room
Set temp.
Cool
Mode
▌ Operation mode
Indoor unit operation mode appears here.
▌ Preset temperature
Preset temperature appears here.
▌ Clock (See the Installation Manual.)
Current time appears here.
▌ Fan speed
Fan speed setting appears here.
▌ Button function guide
Functions of the corresponding buttons appear here.
▌
Appears when the ON/OFF operation is centrally controlled.
▌
Appears when the operation mode is centrally controlled.
▌
Appears when the preset temperature is centrally controlled.
▌
Appears when the filter reset function is centrally controlled.
▌
Indicates when filter needs maintenance.
▌ Room temperature (See the Installation Manual.)
Current room temperature appears here.
▌
Appears when the buttons are locked.
Most settings (except ON/OFF, mode, fan speed, temperature) can be made from the Menu screen.
(Refer to operation manual included with remote controller.)
Fri
Auto
Temp. Fan
<Basic mode>
Cool Set temp.
Mode
▌
Appears when the On/Off timer, Night setback, or Auto-off timer
function is enabled.
appears when the timer is disabled by the centralized control
system.
▌
Appears when the Weekly timer is enabled.
▌
Appears while the units are operated in the energy-save mode. (Will
not appear on some models of indoor units)
▌
Appears while the outdoor units are operated in the silent mode.
(This indication is not available for CITY MULTI models.)
▌
Appears when the built-in thermistor on the remote controller is
activated to monitor the room temperature ( ).
appears when the thermistor on the indoor unit is activated to
monitor the room temperature.
▌
Indicates the vane setting.
▌
Indicates the louver setting.
▌
Indicates the ventilation setting.
▌
Appears when the preset temperature range is restricted.
Fri
Auto
Temp. Fan
5