Handling Guidelines - Pioneer DEH-2450UB Owner's Manual

Additional information
Message Cause Action
CHECK USB The USB con- Check that the
nector or USB USB connector or
cable has short- USB cable is not
circuited. caught in some-
thing or dam-
aged.
The connected Disconnect the
USB storage de- USB storage de-
vice consumes vice and do not
more than use it. Turn the
500 mA (maxi- ignition switch to
mum allowable OFF, then to ACC
current). or ON and then
connect only
compliant USB
storage devices.
The iPod oper- Make sure the
ates correctly connection cable
but does not for the iPod has
charge. not shorted out
(e.g., not caught
in metal objects).
After checking,
turn the ignition
switch OFF and
back ON, or dis-
connect the iPod
and reconnect.
Message Cause Action
ERROR-19 Communication Perform one of
failed. the following op-
erations.
–Turn the ignition
switch OFF and
back ON.
–Disconnect the
USB storage de-
vice.
–Change to a dif-
ferent source.
Then, return to
the USB source.
iPod failure. Disconnect the
cable from the
iPod. Once the
iPod's main
menu is dis-
played, reconnect
the iPod and reset
it.
ERROR-23 USB storage de- USB storage de-
vice was not for- vice should be for-
matted with matted with
FAT12, FAT16 or FAT12, FAT16 or
FAT32. FAT32.
ERROR-16
The iPod firm- Update the iPod
ware version is version.
old.
iPod failure. Disconnect the
cable from the
iPod. Once the
iPod's main
menu is dis-
played, reconnect
the iPod and reset
it.
STOP There are no Select a list that
songs in the contains songs.
current list.
Additional information
Message Cause Action
NOT FOUND No related Transfer songs to
songs. the iPod.

Handling guidelines

Discs and player
Use only discs that feature either of the following
two logos.
Use 12-cm discs. Do not use 8-cm discs or an
adapter for 8-cm discs.
Use only conventional, fully circular discs. Do not
use shaped discs.
Do not insert anything other than a CD into the
CD loading slot.
Do not use cracked, chipped, warped, or other-
wise damaged discs as they may damage the play-
er.
Unfinalized CD-R/RW discs cannot be played
back.
Do not touch the recorded surface of the discs.
Store discs in their cases when not in use.
Do not attach labels, write on or apply chemicals
to the surface of the discs.
To clean a CD, wipe the disc with a soft cloth out-
ward from the center.
Condensation may temporarily impair the player's
performance. Let it rest for about one hour to ad-
just to a warmer temperature. Also, wipe any
damp discs off with a soft cloth.
Playback of discs may not be possible because of
disc characteristics, disc format, recorded applica-
tion, playback environment, storage conditions,
and so on.
Road shocks may interrupt disc playback.
When using discs that can be printed on label sur-
faces, check the instructions and the warnings of
the discs. Depending on the discs, inserting and
ejecting may not be possible. Using such discs
may result in damage to this equipment.
Do not attach commercially available labels or
other materials to the discs.
! The discs may warp making the disc unplay-
able.
! The labels may come off during playback and
prevent ejection of the discs, which may result
in damage to the equipment.
USB storage device
Connections via USB hub are not supported.
Do not connect anything other than a USB stor-
age device.
Appendix
15
En