Advertisement
Q
S
G
UICK
TART
UIDE
Location and Mounting
The
SMD 515
Desktop Installation
To set up the
to support the unit's weight. Place it where it will not be subject to spills or impacts. Route cables to
the unit so that they will not be hit or pulled, causing damage to the connectors or to the unit itself.
Make sure that there is a sufficient flow of cool air so that the unit's operating ambient temperature
range is not exceeded.
If degraded picture quality is observed while viewing copy-protected VOD movies, connect
NOTE:
the set-top box directly to the TV set. Do not connect through a VCR.
Circuit Protection and Grounding
When connecting the
circuit to ensure that the branch circuit, as well as the power source, will not be overloaded. Also
make sure that a protected power strip is used to attach the unit to the power supply.
This is a
interference for which the user may need to take mitigating action. If the Ethernet port
has a cable connected to it, that cable must be properly shielded and grounded to
minimize RF emissions that could interfere with nearby equipment.
Front and Rear Panel Views
Front Panel and Functions
The front panel of the
shows the LED indicators and state.
Table 1
Power
Network
Record
2
unit is set up for desktop operation. Maintain a clean, dry environment for the unit.
unit in a desktop environment, place the unit on a flat surface sturdy enough
SMD 515
unit to the power supply, review the ratings of all equipment in the
SMD 515
FCC-Mandated Suppression of Radio Frequency Emissions
WARNING:
product. In a domestic environment this product may cause radio
Class A
is shown in
SMD 515
Figure 1: SMD 515 front panel
Table 1: SMD 515 LED indicators and state
LED Indicator
Color and State
Green - constant
none
Green - flashing
Green - constant
Red - constant
.
Figure 1
Decode mode (ON)
Standby mode (OFF)
Ethernet connection is up
Decoding a multicast stream
Recording if equipped with PVR
(Personal Video Recorder)
800071-01C
Description
www.wegener.com
Advertisement
