Table of Contents
Advertisement
1
:
Observe safety precautions – see
chapter on "Safety Precautions and
Working Techniques".
:
Push hand guard (1) forward:
The chain is now locked.
:
Press down the trigger interlock
lever (2) and pull the throttle
trigger (3) at the same time.
Set the Master Control to:
Position 4 if engine is cold.
Position 5 if engine is warm
(also use position 5 if the engine has
been running but is still cold)
MS 381
5
4
2
3
:
Place your saw on the ground.
:
Make sure you have a firm footing –
check that the chain is not touching
any object or the ground.
Bystanders must be well clear of the
general work area of the saw.
:
Hold the saw firmly on the ground
with your left hand on the front
handle – your thumb should be
under the handlebar.
:
Put your right foot into the rear
handle and press down.
Alternative method of starting:
:
Hold the rear handle tightly between
your legs, just above the knees.
:
Hold the front handle firmly with
your left hand – your thumb should
be under the handlebar.
English
25
Hide quick links:
Advertisement
Table of Contents
