Table of Contents
Advertisement
st212_en.bk : opt_menu.fm5 Page 56 Tuesday, May 18, 1999 3:52 PM
Cell Broadcast Messages
These are general messages, broadcast to a group of phones and
can only be received when your phone is in standby mode.
These messages are broadcast in numbered 'channels' and, in
general, each channel will tend to carry one particular type of
information.
Typical cell broadcast channels could have information on local
weather conditions, traffic reports or stock market prices. Please
contact your network operator for a list of available channels and
the information they supply.
When the message has scrolled across the display, the beginning
of the message will be shown until you either remove it or a new
message arrives.
How to Read SMS Messages
You can use the scroll keys (< and >) to scroll through
messages in either the Received Messages or Outgoing Messages
lists.
To display a specific message, enter the message number, for
example press 5 to display the 5th message. If the message
does not exist, Invalid Msg Number will be displayed.
Alternatively, to display the next message, press O and select
Go To Next Message.
English
56
Using the Options Menu
How to Create and Edit SMS Messages
Use the Message Editor to create or modify text messages. When
you enter the editor, the last message that was edited will be
displayed. Press and hold C to clear the message and start a
new one, or modify the message displayed. For an explanation of
how to enter text, see 'How to Enter Alphabetic Characters' .
Press O once you have completed your message. You will then
be presented with the following options:
Send Message - If you select this option you will be
prompted for a phone number, enter the number and then
press O to send the message.
Store Message - Select this option to store your edited
message in your Outgoing Messages list.
AIf you don't store the message after it has been edited, you
will lose all your changes as soon as you select another
message to be edited.
j Call Voicemail
i Press E. Select the Quick Access feature (R Call
Voicemail?) or after the tone, say the Voice Tag name. See
'Voice Control for Quick Access Features'.
This option will make a call to the current voicemail number. You
can also press f to call the Voicemail number.
The voicemail number is entered using the 'Voicemail Number'
option in the Message Settings menu.
Advertisement
Table of Contents
