Mazda 6 2004 Owner's Manual page 117

Driving Your Mazda
Starting and Driving
M To Set Speed
1. Activate the cruise control system.
2. Accelerate to the desired speed, which
must be more than 40 km/h (25 mph).
3. Press the SET/COAST button and
release it at the speed you want.
Release the accelerator at the same
time.
Don't continue to hold in the button.
Until you release it, speed will
continue to drop (unless you continue
to accelerate) and you'll miss the
desired speed.
NOTE
• The SET function can't be activated
until about 2 seconds after the ON/
OFF switch has been engaged.
• On a steep grade, the vehicle may
momentarily slow down going up or
speed up while going down.
5-18
M To Increase Cruising Speed
Follow either of these procedures.
• Press the RESUME/ACCEL button
and hold it. Your vehicle will
accelerate.
Release the button at the speed you
want.
Your vehicle has a tap-up feature that
allows you to increase your current
speed in increments of 1.6 km/h (1
mph) by a momentary tap of the
RESUME/ACCEL button. Multiple
taps will increase your vehicle speed
1.6 km/h (1 mph) for each tap.
• Accelerate to the desired speed.
Press the SET/COAST button and
release it immediately.