Advertisement
Before First Use
PLEASE KEEP THESE IMPORTANT
SAFEGUARDS IN MIND WHEN USING THE
APPLIANCE:
WARNING: Never leave the appliance
unattended while in use.
CAUTION: Do not blend hot liquids.
Allow liquids and foods to cool to room
temperature before blending.
CAUTION: Blades are sharp! Use extreme
caution when handling the blade
assemblies. Always hold them by the base of
the blade assembly.
CAUTION: Never remove the container while
the appliance is still running.
CAUTION: We do not recommend grinding in
any of our Nutri Ninja
Cups.
™
IMPORTANT: Never run the appliance empty.
IMPORTANT: Appliance accessories are not
intended to be used in the microwave as it
may result in damage to the accessories.
7
086 728 8149 (Calls charged at VAS rates. Free minutes do not apply.)
CAUTION: Blade assemblies are sharp and
removable, handle with care. When handling the
blade assemblies, do not hold the blades, always
hold by the base of the blade assembly.
1
Remove all packaging material and labels from the
appliance.
2
Wash the lids, cups, and Pro Extractor Blades
™
warm, soapy water with a soft cloth.
CAUTION: Handle the blade assemblies with care
when washing as the blades are very sharp.
3
Rinse and dry thoroughly.
4
Cups, lids and Pro Extractor Blades are all dishwasher
safe. It is recommended that the lids and attachments
be placed on the top rack. Ensure that the blade
assembly is removed from the cup or grinder before
placing in the dishwasher.
5
Wipe the motor base clean with a damp cloth.
Use of the Nutri Ninja
WARNING: Never leave the appliance unattended while in use.
CAUTION: Pro Extractor Blades
Extractor Blades, do not hold the blades, always hold by the base of the blade assembly.
CAUTION: DO NOT BLEND HOT LIQUIDS. Allow the liquids and foods to cool to room temperature before
blending.
IMPORTANT: Make sure that the motor base is plugged in for use.
IMPORTANT: When processing soft dry ingredients such as day-old bread or cheese use quick, short 1
second pulses. Do not overfill to avoid overheating the appliance. Allow the appliance to cool after each use.
ASSEMBLY
or
or
Fig. 1
Fig. 2
1
Place the motor base on a clean, dry, level surface such
as a counter or table top. Press down on the motor
base to make sure that the suction cups adhere to the
counter or table top.
2
Make sure that the motor base is plugged in for use.
Lights will not yet illuminate.
3
Add ingredients to the cup.
in
NOTE: Do not overfill! to avoid spilling, do not add
ingredients past the "MAX" fill line.
4
Place the Pro Extractor Blades onto the cup and twist it
on tightly until you have a good seal. (Fig. 1)
5
Turn the cup upside down and place it onto the motor
base, aligning the tabs on the cup with the motor base.
Turn it clockwise, until you feel it click into place. The
Timer light will illuminate. (Fig. 2)
6
Press one of the buttons to activate. (Fig. 3)
NOTE: When using the Auto-iQ
operate using pulses, pauses and continuous runs. The
pauses allow the contents of the cup to settle. When
the timer reaches "0", it will stop by itself.
Cups
™
are sharp and removable, handle with care. When handling the Pro
™
USE
Fig. 3
Fig. 4
7
To remove the cup, ensure that the motor has stopped
running. Then turn the cup anticlockwise (Fig. 4) and
pull straight up to remove. (Fig. 5)
8
Turn the cup upright and remove the Pro Extractor
Blades by twisting the Pro Extractor Blades
anticlockwise. Be sure to store the Pro Extractor Blades
attached to an empty cup when not in use.
9
Twist the Sip & Seal
drink on the go. Press flip top cap firmly into the
opening to get the best seal. The flip top cap locks open
when pressed backward.
10 Make sure that the motor base is unplugged when not
in use.
11 To remove the motor base unit, tip the unit forward
from the rear to easily disengage the suction cups.
™
presets, the unit will
REMOVAL
Fig. 5
lid onto the cup to enjoy your
™
www.ninjablenders.co.za
8
Advertisement
