HP ProBook 430 G2 Maintenance And Service Manual page 86

Hide thumbs Also See for ProBook 430 G2:
Table of Contents

Advertisement

12.
If it is necessary to remove the display panel from the enclosure, remove the 4 Phillips PM1.6×2.5
screws (1) that secure the panel to the display enclosure, and then lift the top of the panel upward (2).
The raw display panel is available using spare part number 768206-001.
13.
Rotate the display panel all the way over (1), disconnect the display cable from the rear of the panel (2),
and then remove the display panel (3) from the enclosure.
14.
If it is necessary to replace the display hinges, remove the 6 Phillips PM2.5×3.0 screws (1) that secure
the display hinges to the display enclosure.
74
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents