Top Cover - HP ProBook 430 G2 Maintenance And Service Manual

Top cover

NOTE: Top cover spare part kits include the touchpad assembly.
Description
Top cover for use in models with a fingerprint reader (includes touchpad)
Top cover for use in models without a fingerprint reader (includes touchpad)
Before removing the top cover, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
4. Remove the following components:
a. Battery (see
b. Service door (see
c. Hard drive
d. Keyboard (see
Remove the top cover:
1. Position the computer upside-down with the front toward you.
2. Remove the 6 rubber screw covers and 9 Torx T8M2.5×5.0 screws that secure the top cover to the
computer.
3. Remove the 1 Phillips PM2.5×3.0 screws that secure the top cover to the computer.
4. Position the computer upright and open it as far as possible.
48 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Battery on page 30).
Service door on page
(Hard drive on page 32)
Keyboard on page 40)
31).
Spare part number
768213-001
773562-001