System Information; Contents - Yamaha Aventage BD-A1040 Owner's Manual

SACD Output
Output Priority
You can select the output priority from HDMI or Analog
for playing back SA-CDs.
*
HDMI The settings for SACD Priority and HDMI Output
are applied.
Analog Always plays back the SA-CD's high quality 2-
channel area. The signal is fully optimized for analog
2-channel outputs to be best quality.
Note
– Selecting Analog mutes the HDMI output when SA-
CD is played back. For details, see "SA-CD output
formats" (p. 41).
SACD Priority
Selects the playing back priority for 2-channel contents or
multi-channel contents, when the disc contains both types
of contents.
*
Multi-ch , 2-ch
HDMI Output
You can select audio signal output from HDMI terminal
when SA-CD is played back.
* Outputs DSD raw signal. When this Player is
DSD
connected to DSD compatible AV receiver, this item
is recommended.
PCM
Outputs PCM signal decoded by this Player.
Speaker Setting
2ch Downmix
You can select down mix method to analog 2-ch from
Stereo or Lt/Rt.
* Changes channel output to stereo, which only
Stereo
delivers sound from the two front speakers.
Lt/Rt Select this item if this unit is connected to a Dolby
Pro Logic decoder. Sound from rear speakers is
mixed to the 2-ch stereo sound.
Post Process
UpMix
You can multi-channelize the 2-channel audio signal. To
multi-channelize, select DTS NEO:6, then select Cinema
or Music mode.
*
Off , DTS NEO:6

■ System Information

Software version and MAC address (p. 48) are displayed.
SETUP menu
4
39
En