Bluetooth; Messages On The Screen - Yamaha Aventage BD-A1040 Owner's Manual

Troubleshooting

■ Bluetooth

Problem
Cannot make the player paired with the
Bluetooth device.
Cannot make a Bluetooth connection.
No sound is produced or the sound is
interrupted during playback.

■ Messages on the screen

– The following messages appear on the TV screen in case the disc you tried to play back is not appropriate or the
operation is not correct.
Error message
Unsupported File
Wrong region code!
Network has FAILED.
Network is OK, proxy has
FAILED.
BD-Live connection is
prohibited in SETUP menu.
Upgrade has failed for some
reason!
IP Setting is not valid! Please
reset...
46
En
– Make sure you press Bluetooth and then RED to switch the Player to the pairing
mode.
– Perform pairing operations with a device which supports A2DP.
– Use a Bluetooth device whose password is "0000".
– Move the player and Bluetooth device closer to each other.
– Devices that use a 2.4 GHz frequency band, such as a microwave, wireless LAN, or
digital cordless device, may interrupt the communication. Move the Player away from
such devices, or turn off such devices.
– Another Bluetooth device is currently connected. Terminate current Bluetooth
connection, and perform pairing with the new device (p. 24)
– Another Bluetooth device is currently connected. Terminate current Bluetooth
connection, and make a connection with the new device.
– More than nine devices are paired and the oldest pairing information is deleted. Perform
pairing again (p. 24).
– The Bluetooth connection between the Player and Bluetooth device is terminated. Make
a connection again (p. 25).
– Move the player and Bluetooth device closer to each other.
– Devices that use a 2.4 GHz frequency band, such as a microwave, wireless LAN, or
digital cordless device, may interrupt the communication. Move the Player away from
such devices, or turn off such devices.
– Make sure that the Bluetooth function is enabled and set to send Bluetooth audio signals
on the Bluetooth device.
– Turn up the volume level on the Bluetooth device.
– The file is not supported with this Player. See "Types of discs/files that can be used with this Player"
(p. 3).
– The disc is an incompatible region code. See "Region management information for Blu-ray Disc/
DVD videos" (p. 3).
– This Player cannot be connected to the network. Check connection (p. 15) and Network setting (p. 36).
– This Player cannot be connected to the proxy server. See "Proxy Setting" (p. 36).
– BD-Live connection is prohibited. See "BD-Live Connection" (p. 36).
– Upgrade is failed. Check if the upgrade file is corrupted or unreadable.
– The IP Setting entered is not valid. Enter the correct information again.
Possible causes and solutions
Possible causes and solutions