Connecting To A Tv And Audio Equipment - Yamaha Aventage BD-A1040 Owner's Manual

Video/audio connections

■ Connecting to a TV and audio equipment

Connect this Player to the TV with an HDMI cable, and this Player to the audio equipment with an audio cable (digital
optical, digital coaxial or stereo pin cable).
Caution!
Do not connect the power cable of this Player until all connections are completed.
HDMI output
Hints
– To change the output mode of COAXIAL/OPTICAL jacks, configure "Coaxial / Optical" (p. 38) in Audio Setting.
– If the playback audio is output from both the TV speakers and audio equipment, set HDMI in Audio Setting to Off
to disable the audio output to the TV.
– Audio signals of SACDs cannot be output from the COAXIAL or OPTICAL jack (p. 41).
14
En
This Player
HDMI
HDMI
HDMI cable
HDMI input
HDMI IN
TV
DIGITAL OUT
COAXIAL
NETWORK
OPTICAL
USB
AUDIO OUT
COAXIAL
OPTICAL
OPTICAL COAXIAL AUDIO
AUDIO OUT
OPTICAL, COAXIAL or
AUDIO OUT L/R jacks
Audio cable
(digital optical, digital coaxial or
stereo pin cable).
Audio input
(digital optical, digital coaxial or
analog stereo)
Audio equipment
(such as sound bar)